Every winter, it happens the same way.
Temperatures drop overnight. A property sits quiet for hours. Then a pipe freezes, pressure builds, and suddenly there’s water pouring into walls, ceilings, and floors. By the time someone notices, the damage is already done.
Frozen pipes are one of the most common causes of winter water losses—and one of the most preventable. The key is understanding why they burst and what actually works to stop it.
Most people assume pipes burst because ice expands. That’s only part of the story.
The real problem is pressure.
When water freezes inside a pipe, it creates a blockage. If water continues to flow behind that ice—especially in closed systems—pressure builds between the ice and the nearest shutoff or faucet. Eventually, the pipe fails at its weakest point. Often, the break isn’t where the ice formed, which is why damage can spread quickly.
This is why frozen pipes are so destructive—and why prevention needs to focus on more than insulation alone.
Not all pipes face the same risk. In winter losses, problem areas tend to repeat themselves:
Identifying these high-risk areas early can dramatically reduce the chance of a burst.
Once cold weather sets in, prevention becomes about maintaining heat, relieving pressure, and reducing exposure.
Consistent heat matters. Even modest indoor heating can keep pipes from freezing. Sudden temperature drops overnight are especially dangerous when thermostats are turned down too far.
Insulating exposed pipes helps, especially in attics, crawl spaces, and garages. Foam insulation and sealing air leaks around plumbing reduce cold air exposure.
Allowing faucets to drip can make a big difference. Moving water is less likely to freeze, and a drip relieves pressure if ice begins to form.
Exterior lines should always be shut off and drained before freezing temperatures arrive. Leaving hoses connected is one of the fastest ways to create a freeze point.
Cabinet doors under sinks can be opened to let warm air circulate around plumbing on exterior walls.
For vacant properties, full winterization—shutting off water supplies and draining systems—is often the safest option.
Even with preparation, freezes can still happen.
If a pipe is suspected to be frozen:
If a pipe has already burst, stopping the water quickly and calling a restoration professional right away can significantly limit damage.
Winter freeze losses tend to come in clusters. When they happen, response time, safety, and documentation all become critical.
But prevention plays a role too. Helping customers understand freeze risks:
Sharing guidance before winter hits often saves time, money, and stress for everyone involved.
Frozen pipes may be a winter reality—but burst pipes don’t have to be.
Understanding how freezes cause damage, knowing where risks exist, and taking simple preventative steps can stop a minor cold snap from becoming a major water loss. And when prevention isn’t enough, fast, informed action makes all the difference!
Have a blog topic you want us to discuss? Leave a comment below!